Inventory Management · Nov 17, 2026

ABC classification and criticality in MRO inventory: which spare parts must never run out

  • Home
  • Blog
  • ABC classification of MRO inventory
On-site managed MRO inventory - IMS Global

Almost every plant has spare parts that pile up and others that are missing exactly when a machine stops. The cause is rarely a lack of budget: it is usually that nobody decided, with a clear criterion, what must always be in the storeroom and what can be ordered when needed.

The problem: treating all MRO inventory the same

An MRO (maintenance, repair and operations) storeroom can hold thousands of SKUs: bearings, belts, seals, sensors, fuses, fasteners, consumables, PPE. If they are all replenished with the same rule, or with no rule at all, two things happen at once: capital tied up in parts that are almost never used, and shortages of parts that do stop operations. Classifying inventory is the first step toward balancing both.

Step 1: ABC analysis, the starting point

ABC analysis is based on the Pareto principle: a small group of items accounts for most of the consumption value. As a general industry rule:

  • Class A: few items that make up most of the annual value. They deserve tight control, frequent review and better purchasing terms.
  • Class B: a middle group with moderate control.
  • Class C: many items of low individual value. Simplify their replenishment so you don't spend more managing them than they cost.

The exact percentages vary from plant to plant; what matters is that the classification is based on your own consumption data rather than an assumption.

Step 2: criticality, what ABC can't see

ABC measures how much a part is worth or how fast it moves, not what happens if it is missing. A fuse, a sensor or a seal costing a few dollars can stop an entire production line, yet by value it would land in class C. That is why a second criterion is worth adding: criticality. Some questions that help define it:

  • What happens to production or safety if this part is unavailable? Does the line stop, or is a task merely delayed?
  • How long does it take to arrive if it has to be ordered? Days, weeks, an import?
  • Is there an approved substitute or equivalent available locally?
  • Is the part specific to a critical machine or for general use?

Step 3: cross both criteria and assign a policy

Combining value (ABC) with criticality gives a smarter replenishment rule than either one alone:

  • High criticality and long lead time: keep safety stock even if the part rarely moves, even if it is class C.
  • High turnover and low criticality: frequent replenishment with well-defined minimums and maximums.
  • Low criticality and short lead time: on-demand ordering or minimal stock; they don't justify tied-up capital.
  • Parts with no movement for a long time: check whether they are still needed before continuing to store them.

Keep the classification alive

A classification done once and filed away loses value fast: equipment, suppliers and consumption all change. Review it periodically and update minimums and maximums with actual consumption. Recording every issue from the storeroom also helps, because without consumption data any classification becomes a guess again.

Frequently asked questions

What is ABC inventory analysis?

It is a method that ranks items by their share of annual consumption or value: a few items (A) hold most of the value and many (C) only a fraction. It helps decide how much attention each group deserves.

Why isn't ABC enough on its own for MRO?

Because it measures value or turnover, not the impact of a missing part. A cheap sensor or fuse can stop an entire line, so it is combined with the criticality of the equipment where it is used.

Which spare parts should always be in stock?

Those that combine high impact if they fail, long lead times and little chance of a substitute. The rest can be handled with minimum stock, frequent replenishment or on-demand ordering.

IMS Global, your partner in MRO inventory management

At IMS Global we help plants in Tijuana and the border region organize their MRO inventory through our on-site managed inventory program (VMI) and the SAMI system, so critical spares are available and the rest is replenished with clear minimum and maximum rules, without excess tied-up capital. If you want to review what you are missing and what you have too much of, let's talk.

← Back to Blog

Want to know which critical spares your storeroom is missing?