Safety & Hygiene · Nov 20, 2026

Lockout/tagout (LOTO) in maintenance: how to prevent hazardous energy accidents

Industrial safety equipment - IMS Global

Many serious maintenance accidents happen when someone starts a machine that another person is repairing. Nothing has to fail: an incomplete handoff or a switch flipped at the wrong time is enough. Lockout/tagout, known as LOTO, exists so that this does not depend on anyone's memory or good faith.

What lockout/tagout (LOTO) is

LOTO is a procedure to isolate every energy source of a machine, place a personal padlock on each isolation point and add a tag that shows who is working and since when. While the lock is on, nobody else can energize the machine. Only the person who placed it removes it.

Which energy sources to consider

It is not only electricity. Before servicing a machine, identify all of its energy sources:

  • Electrical: panels, switches, connections.
  • Pneumatic and hydraulic: pressurized lines that can move when bled.
  • Mechanical: compressed springs, flywheels or suspended loads that can fall or spin.
  • Thermal and chemical: steam, hot surfaces, lines carrying product.

Stored energy is what surprises people most: a capacitor, an accumulator or a raised load can stay dangerous with the machine switched off.

Basic procedure steps

  • Notify affected personnel and define the scope of work.
  • Shut down the machine using its normal procedure.
  • Isolate each identified energy source.
  • Lock and tag each point with a personal padlock and tag.
  • Release or contain stored energy.
  • Verify that the machine does not start and no energy remains before starting work.
  • Remove locks, only by the person who placed them, and notify before re-energizing.

What the regulations say

In Mexico, NOM-029-STPS-2011 sets safety conditions for electrical installation maintenance activities, and NOM-004-STPS-1999 covers protection systems and safety devices on machinery and equipment. Neither replaces your risk assessment: review their current text and document a procedure per machine. If your plant also operates in the U.S., the reference standard is OSHA 29 CFR 1910.147 (control of hazardous energy). Management systems such as ISO 45001 also expect operational controls for this kind of risk.

The kit: what people often forget

A procedure without materials at hand does not get followed. As a general rule, a working kit includes:

  • Safety padlocks, one per person, with a distinctive color or marking.
  • Devices to lock switches, valves and plugs.
  • Durable tags with name, date and reason.
  • Cards or boards with the machine's procedure.

Keeping them in accessible places and restocking regularly prevents people from improvising with a wire or tape.

Common mistakes

  • Locking only the electrical source and forgetting stored energy.
  • One padlock shared by several people.
  • Not verifying the machine is really de-energized.
  • Training once and not repeating it for new staff or contractors.

Frequently asked questions

What does LOTO mean?

It stands for Lockout/Tagout. It is the set of steps used to isolate and lock a machine's energy sources with padlocks and tags, so it cannot start or release energy while someone is working on it.

Which Mexican standard applies?

No single standard covers everything. NOM-029-STPS-2011 sets safety conditions for electrical installation maintenance, and NOM-004-STPS-1999 deals with machinery and equipment safety. Review the current text of each and define an internal procedure per machine. In the U.S. the reference is OSHA 29 CFR 1910.147.

What should a lockout kit include?

As a general rule: safety padlocks with a unique key per person, lockout devices for switches, valves and plugs, warning tags with name and date, and a visible procedure at each machine.

IMS Global, your partner in safety and maintenance

At IMS Global we supply safety and hygiene equipment and maintenance consumables to plants in Tijuana and the border region, and we can help you source and restock the materials your procedure needs. If you are building or reviewing your lockout/tagout program, let's talk about what your plant requires.

← Back to Blog

Need safety materials for your maintenance program?